Selection of an effective sludge dewatering system for a small wastewater treatment plant

The Jahra Plant was commissioned in 1981 as a secondary treatment plant employing the extended aeration process. The plant has been upgraded since that time by constructing additional tertiary filtration units to improve effluent quality. The plant has a design capacity of 66 000 m³/d. At present, the daily inflow to the plant is about 47 000 m³/d of domestic sewage. The sludge produced at the Jahra Plant can be classified as excess activated sludge which combines the primary and secondary solids. At present, there are 30 drying beds receiving about 100 m³ of sludge daily. Sewage- sludge production represents about 0.5% of the total flow treated at the plant and is increasing yearly with increases in population and water consumption. Present dewatering systems are not adequate to cope with expansion in sewage treatment. Increasing the capacity of the existing plant would require more drying beds that could exacerbate existing odor problems. Some dewatering systems, such as the belt filter press and the centrifuge, have been tested to determine the most effective one under local conditions. Appropriate polymer doses for thickening have been determined. This paper describes present sludge dewatering units and operating techniques which have been developed during the operation of this facility.