Project Details
Abstract Arabic
الهدف الرئيسي لهذا المشروع هو تحسين الإجراءات الفنية لحضانة وفقس بيوض السبيطي لزيادة معدل إنتاج اليرقات التي
بدورها تعتبر خطوة إضافية لتحسين الإنتاج التجاري لأسماك السبيطي الصغيرة.
ينقسم العمل البحثي في المشروع إلى قسمين: الأول
تقييم مركبات كيميائية مختارة لتعقيم بيوض السبيطي, والثاني تحسين إجراءات حضانة البيوض. في القسم الأول
إستخدمت أربع
مركبات كيميائية هي : أيودوفور (
25
،
50
،
75
،
100
، و
125
ppm
)، فورمالين (
50
،
100
،
150
،
200
و
250
ppm
)،
هيدروجين بيروكسايد (
50
،
100
،
150
،
200
و
250
ppm
) وبرونوبول (
50
،
150
،
250
،
350
و
450
ppm
)،
مع تثبيت فترة
معالجة البيوض بأربع دقائق. أثبتت النتائج أن مركب الأيودوفور بتركيزات (
75
و
100
ppm
) هو أفضل مركب تعقيم سواء من
حيث القدرة على قتل البكتيريا أو معدل تفقيس البيوض و حياة يرقات السبيطي بعد ثلاثة أيام من فقسها. مركب الفورمالين جاء في
المرتبة الثانية من حيث النتائج وذلك بتركيز (
100
و
150
ppm
)، الهيدروجين بيروكسايد أعطى نتائج جيدة بينما أظهرالبرونوبول
نتائج غير مشجعة بحيث لا يمكن إستخدامه في تعقيم بيوض السبيطي. في القسم الثاني أجريت تجربتين، الأولى لدراسة التأثير
المشترك لثلاث معدلات لتبديل الماء (
8
،
16
و
24
ليتر في الدقيقة) مع ثلاثة كثافات لبيوض السمك (
1000
،
2000
و
3000
بويضة
في الليتر). و الثانية لدراسة التأثير المشترك لثلاث مستويات لتدفق الهواء (
50
،
100
و
150
مل في الدقيقة) مع ثلاثة كثافات
لبيوض السمك (
1000
،
2000
و
3000
بويضة في الليتر) وذلك على بقاء ومعدل فقس البيوض. بينت النتائج أن تأثير معدل تبديل
الماء على عملية فقس البيوض كان كبيرا
(P = 0.012)
وأن أفضل معدل تبديل للماء هو (
8
ليتر في الدقيقة)، كما أظهر معدل تدفق
الهواء تأثيرا كبير
(P = 0.000)
على معدل فقس البيوض وأن أفضل معدل تدفق للهواء هو (
100
مل في الدقيقة). في كلا
التجربتين لم يظهر أي تأثير واضح لكثافات بيوض السمك على معدل الفقس.
بدورها تعتبر خطوة إضافية لتحسين الإنتاج التجاري لأسماك السبيطي الصغيرة.
ينقسم العمل البحثي في المشروع إلى قسمين: الأول
تقييم مركبات كيميائية مختارة لتعقيم بيوض السبيطي, والثاني تحسين إجراءات حضانة البيوض. في القسم الأول
إستخدمت أربع
مركبات كيميائية هي : أيودوفور (
25
،
50
،
75
،
100
، و
125
ppm
)، فورمالين (
50
،
100
،
150
،
200
و
250
ppm
)،
هيدروجين بيروكسايد (
50
،
100
،
150
،
200
و
250
ppm
) وبرونوبول (
50
،
150
،
250
،
350
و
450
ppm
)،
مع تثبيت فترة
معالجة البيوض بأربع دقائق. أثبتت النتائج أن مركب الأيودوفور بتركيزات (
75
و
100
ppm
) هو أفضل مركب تعقيم سواء من
حيث القدرة على قتل البكتيريا أو معدل تفقيس البيوض و حياة يرقات السبيطي بعد ثلاثة أيام من فقسها. مركب الفورمالين جاء في
المرتبة الثانية من حيث النتائج وذلك بتركيز (
100
و
150
ppm
)، الهيدروجين بيروكسايد أعطى نتائج جيدة بينما أظهرالبرونوبول
نتائج غير مشجعة بحيث لا يمكن إستخدامه في تعقيم بيوض السبيطي. في القسم الثاني أجريت تجربتين، الأولى لدراسة التأثير
المشترك لثلاث معدلات لتبديل الماء (
8
،
16
و
24
ليتر في الدقيقة) مع ثلاثة كثافات لبيوض السمك (
1000
،
2000
و
3000
بويضة
في الليتر). و الثانية لدراسة التأثير المشترك لثلاث مستويات لتدفق الهواء (
50
،
100
و
150
مل في الدقيقة) مع ثلاثة كثافات
لبيوض السمك (
1000
،
2000
و
3000
بويضة في الليتر) وذلك على بقاء ومعدل فقس البيوض. بينت النتائج أن تأثير معدل تبديل
الماء على عملية فقس البيوض كان كبيرا
(P = 0.012)
وأن أفضل معدل تبديل للماء هو (
8
ليتر في الدقيقة)، كما أظهر معدل تدفق
الهواء تأثيرا كبير
(P = 0.000)
على معدل فقس البيوض وأن أفضل معدل تدفق للهواء هو (
100
مل في الدقيقة). في كلا
التجربتين لم يظهر أي تأثير واضح لكثافات بيوض السمك على معدل الفقس.
Abstract English
The objective of this study was to improve the egg hatching procedure of sobaity inorder to
maximize larvae production as an additional step toward enhancing the commercial fry productin of
sobaity. The work of this project was divided into two main research activities; evaluation of some
selected chemical disinfectants for sobaity eggs and the optimization of egg incubation procedures. In
the first activity, iodophor (25, 50, 75, 100 and 125 ppm), formalin
(50, 100, 150, 200, and 250 ppm),
hydrogen peroxide (50, 100, 150, 200, and 250 ppm) and bronopol (50, 150, 250, 350, and 450 ppm)
were tested at four min exposure. The results showed that iodophor at concentrations (75 and 100
ppm) was the best of all of the disinfectants used in bacterial killing ability, egg hatching percent and
larval survival up to three days post hatch. Formalin was the second best disinfectant at levels 100
and 150 ppm. Hydrogen peroxide gave good results, while bronopol on the other hand, showed
discouraging results and should not be considered for the disinfection of sobaity eggs. In the second
activity, two experiments were conducted to study the combined effect of three water flow rates (8,
16, and 24 l min-1) with three egg densities (1000, 2000, and 3000 egg l-1) as well as three aeration
levels (50, 100, and 150 ml min-1) with three egg densities (1000, 2000, and 3000 egg l-1) on egg
survival and hatching. The results obtained from this study indicate that water exchange has a
significant (P = 0.012) effect on hatchability, and the best water flow was (8 l min-1). The aeration
level significantly (P = 0.000) affected the hatch performance and the best aeration level was (100 ml
min-1). In both the experiments, egg density did not have a significant effect on the egg hatch percent.
maximize larvae production as an additional step toward enhancing the commercial fry productin of
sobaity. The work of this project was divided into two main research activities; evaluation of some
selected chemical disinfectants for sobaity eggs and the optimization of egg incubation procedures. In
the first activity, iodophor (25, 50, 75, 100 and 125 ppm), formalin
(50, 100, 150, 200, and 250 ppm),
hydrogen peroxide (50, 100, 150, 200, and 250 ppm) and bronopol (50, 150, 250, 350, and 450 ppm)
were tested at four min exposure. The results showed that iodophor at concentrations (75 and 100
ppm) was the best of all of the disinfectants used in bacterial killing ability, egg hatching percent and
larval survival up to three days post hatch. Formalin was the second best disinfectant at levels 100
and 150 ppm. Hydrogen peroxide gave good results, while bronopol on the other hand, showed
discouraging results and should not be considered for the disinfection of sobaity eggs. In the second
activity, two experiments were conducted to study the combined effect of three water flow rates (8,
16, and 24 l min-1) with three egg densities (1000, 2000, and 3000 egg l-1) as well as three aeration
levels (50, 100, and 150 ml min-1) with three egg densities (1000, 2000, and 3000 egg l-1) on egg
survival and hatching. The results obtained from this study indicate that water exchange has a
significant (P = 0.012) effect on hatchability, and the best water flow was (8 l min-1). The aeration
level significantly (P = 0.000) affected the hatch performance and the best aeration level was (100 ml
min-1). In both the experiments, egg density did not have a significant effect on the egg hatch percent.
| Status | Finished |
|---|---|
| Effective start/end date | 1/10/11 → 1/10/12 |
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint.